Skip to main content

CANADIAN OPERATORS OPT FOR INCREASED ENVIRONMENTAL PROTECTION WITH ECOSPEED HARD COATING

Océan Taiga, North America’s most powerful ice-going tug, nearing completion at the Industrie Océan shipyard in Ile-aux-Coudres, QC, will feature Subsea Industries’ Ecospeed, following the operational success of the hard coating applied in 2012 to Groupe Océan’s 60t bollard pull ice-going tug Ocean Raymond Lemay.

Océan Taiga, the second 100t bollard pull ice class 1A Super FS escort tug, will join first of class Océan Tundra, which was coated in 2013 with an Ecospeed application. Subsea Industries will also apply the advanced hull protection system to the existing Océan Ross Gaudreault tug, at Groupe Océan’s shipyard in Quebec.

David Flood, Managing Director, Jastram Technologies, the commercial representative for Subsea Industries in Canada, said: “Subsea Industries has had a successful relationship with Groupe Océan, resulting in Ecospeed applications to nine vessels in its fleet. Its first experience with Ecospeed on the Ocean Raymond Lemay was deemed a huge success. When the vessel’s hull was water-jet cleaned this summer after more than 60 months in service, the hull coating showed no sign of paint degradation.”

Flood explained that Groupe Océan specified the coating for the largest tugs in its fleet because of the coatings’ lasting performance and environmental compatibility for operations in ecologically sensitive areas.

“The owner wanted a coating solution that would not impact the marine environment,” said Flood. “Chipping an Ecospeed hard coating almost never happens but when it does, there is no environmental damage, no sediment pollution.”

Manuel Hof, Production Executive and NACE Coatings Inspector at Subsea Industries, added: “Groupe Océan’s vessels operate in highly abrasive waters in ecologically sensitive areas, so it was important for the owner to have a hull a coating system that protects both the vessel and the marine environment.”

Outlining the importance of the Canadian market for Ecospeed, Hof said: “With many vessels operating in the highly sensitive areas, such as the Great Lakes, Alaska and the northwest passage, the Ecospeed hard coating is becoming the hull coating of choice for meeting stringent environmental rules and regulations.”

Jastram Technologies is working on other significant Ecospeed projects in Canada, one of which is a 31,992dwt ice-going bulk carrier.

 

Visitors to SMM this week will be able to find out more about Ecolast and Subsea Industries range of hard coatings in Hall B7, Stand 426.

 

For further information, please contact:

Christophe Verhoeven

Promotion Officer

Subsea Industries

Tel: +32 3 213 53 00

Email: info@hydrex.be

Reader Comments (0)

There are currently no comments on this article. Why not be the first and leave your thoughts below.

Leave Your Comment

Please keep your comment on topic, any inappropriate comments may be removed.

Return to index